[
]
[
]
[
]
[
]
Byron Morgan Turf's Up II Repair Tool
$185.00
Byron Morgan Turf's Up II Repair Tool with 303's Custom Alligator Sheath. As most Byron Morgan fans know these tools are hard to get and sell out quickly. Byron only makes them every few years.
***Sheaths will stretch over time so they will be just a little tight the first few times you use them***
Byron Morgan Turf's Up II Repair Tool Sheath
$75.00
Byron Morgan Turf's Up II Repair Tool Custom 303's Alligator Sheath. This sheath is specifically designed to work with the Byron Morgan Turfs Up Repair Tool.
***Sheaths will stretch over time so they will be just a little tight the first few times you use them***
Byron Morgan Bombs Away Driver Headcover
$100.00
Byron Morgan Flat Sticks Headcover
$80.00
Byron Morgan Flatsticks Driver Headcovers
$65.00
Byron Morgan Flat Sticks Headcoves
$65.00
Byron Morgan California Flatsticks Headcover Set
$65.00
Byron Design California Flatsticks HB Headcovers
$65.00
After searching the internet for days to try and find pictures of Byron Morgan putters with his hand milling options for the face. I thought it would be nice to add this blog on my website. Here are several pictures that I was able to find.
MACHINE PUTTER EPOXIED IN HOSEL REMOVAL INSTRUCTIONS
First, you need a good strong vice mounted on a firm surface, preferably on or near the corner of a workbench, and preferably some aluminum angle pieces to put in the jaws. Next you should protect the head with masking tape on the face and back flange. Make sure the tape doesn’t cover the heel of the face, as you will need that to stick out about an inch from the jaws.down without too much force. When it starts to move, put down the heat source and hold the shaft while you continue to tap the longer screw until it is completely free from
the head.MACHINE Putters the ultimate in custom putters !
MACHINE Putters are designed to offer advanced performance technologies, and unequaled personalization and customization options. In order to achieve these features and benefits, Dave Billings has created numerous Innovations and Intellectual Property Portfolios to cover and protect his inventions. Adjustability in golf clubs is the hottest new category in golf, and Billings has been pioneering this category and his inventions in it for well over a decade.
Billings’ Technologies and Innovations include:
Most MACHINE Putters incorporate classic and traditional design elements to make the putters look and feel comfortable, trustworthy and confidence inspiring. Dave Billings explores numerous design philosophies to suit different golfers’ tastes and needs. These range from his CA2 design philosophy for “Clean At Address” often hiding weights and internal milling and weight redistribution cuts to the inside and underside of the putters. Other Morphing, Transforming and Convertible technologies allow putters to be switched by the factory, a fitter or the owner from classic in shape and appearance to ultra-modern and high tech.
Ultimate Customization has been the primary goal for MACHINE Putters for many years. This was born from the customer satisfaction for all the custom work Dave and his team provided on the HOG series, and work done for TOUR professionals who Billings has worked with, virtually all of whom have used custom versions of Billings’ designs. With the MACHINE Putters & Grips, customization once only available to the Tour Pros is now available to you, and now even more!
Check out each Model line in the Product section of the site, and also see our Custom Series and Gallery pages for more information on the Custom and Personalization options available now, and keep checking back as we add new options going forward.
I'm really excited about offering Machine Putters to the website.
Hey Everyone,
We have some exciting news to share. We are forming a new strategic relationship with Jimmy Sorce (JCigars) of USA Milled to carry and sell MACHINE Putters!
USA Milled will help us expand our lines into Limited Edition ready-made putters, so now you will have the opportunity of getting our very best work in a putter available for immediate delivery. And with our Delta Mod adjustable technologies, Jimmy or you will be able to adjust the specs to meet your exact needs, down to the half degree, or down to the gram... benefits you can’t get with any other putter.
We’ll be broadening our lines to offer a number of new ready-made collections, and new head shapes and models, in addition to the full-blown custom work that so many of you already know us for. Chris, the team here and I are all really excited about the opportunity to work with USA Milled and provide new and exciting products for all Jimmy’s great friends and customers. For instant gratification, and some really cool new models, Jimmy will be your man!
We’re very excited about the opportunity to work together with Jimmy and USA Milled, and eager to show off the new models and options that he’ll be offering after the first of the year and going forward.
Thanks for everyone’s support of our work, and Jimmy and USA Milled – we all think it should be a great match. So let’s have some fun as we welcome Jimmy / USA Milled to Team MACHINE, and get ready to celebrate the New Year and beyond!
All the best,
-Dave Billings
